日韩AV色色,黄色影视网址在线播放观看视频,亚洲人成在线观看,爱爱网免费视频

PA66 80G33L NC010美國杜邦Zytel® 33%玻纖增強抗沖擊性聚酰胺66尼龍塑料（18024445500）

Zytel® 80G33L NC010 is a 33% glass fiber reinforced polyamide 66 resin with outstanding impact resistance developed using DuPont Super
Tough technology.
General information Value Unit Test Standard
Resin Identification PA66-IGF33 - -
Part Marking Code >PA66-IGF33< - ISO 11469
Rheological properties dry / cond Unit Test Standard
Viscosity number 165 / * cm³/g ISO 307, 1157, 1628
Moulding shrinkage, parallel 0.3 / * % ISO 294-4, 2577
Moulding shrinkage, normal 0.8 / * % ISO 294-4, 2577
Mechanical properties dry / cond Unit Test Standard
Tensile Modulus 8700 / 5800 MPa ISO 527-1/-2
Stress at break 142 / 95 MPa ISO 527-1/-2
Strain at break 4 / 5 % ISO 527-1/-2
Flexural Modulus 7400 / 5200 MPa ISO 178
Charpy impact strength 　 　 ISO 179/1eU
23°C 91 / 80 kJ/m² 　
-30°C 80 / 75 kJ/m² 　
Charpy notched impact strength 　 　 ISO 179/1eA
23°C 20 / 22 kJ/m² 　
-30°C 14 / 14 kJ/m² 　
-40°C 13 / 13 kJ/m² 　
Izod notched impact strength 　 　 ISO 180/1A
23°C 21 / 20 kJ/m² 　
-30°C 14 / 10 kJ/m² 　
-40°C 15 / 10 kJ/m² 　
Izod impact strength 　 　 ISO 180/1U
23°C 74/80 kJ/m² 　
-30°C 80/75 kJ/m² 　
Thermal properties dry/cond Unit Test Standard
Melting temperature, 10°C/min 262/* °C ISO 11357-1/-3
Temp. of deflection under load 　 　 ISO 75-1/-2
1.8 MPa 247 / * °C 　
0.45 MPa 262 / * °C 　
Coeff. of linear therm. expansion, parallel 15 / * E-6/K ISO 11359-1/-2
Coeff. of linear therm. expansion, normal 119 / * E-6/K ISO 11359-1/-2
Thermal conductivity of melt 0.22 W/(m K) -
Spec. heat capacity of melt 2200 J/(kg K) -
RTI, electrical, 0.75 mm 120 / * °C UL 746B
RTI, impact 　 　 UL 746B
0.75 mm 65 °C 　
1.5mm 105 / * °C 　
RTI, strength 　 　 UL 746B
0.75 mm 85　°C 　
1.5mm 95 / * °C 　
3mm 105　°C 　
Flammability dry / cond Unit Test Standard
Burning Behav. at 1.5mm nom. thickn. HB / * class IEC 60695-11-10
Thickness tested 1.5 / * mm IEC 60695-11-10
UL recognition UL / * - -
Burning Behav. at thickness h HB / * class IEC 60695-11-10
Thickness tested 0.75 / * mm IEC 60695-11-10
Oxygen index 23 / * % ISO 4589-1/-2
Glow Wire Flammability Index 　 　 IEC 60695-2-1/2
0.75mm 650 / - °C 　
1.5mm 650 / - °C 　
3mm 775 / - °C 　
Glow Wire Ignition Temperature 　 　 IEC 60695-2-1/3
0.75mm 675 / - °C 　
1.5mm 675 / - °C 　
3mm 725 / - °C 　
Electrical properties dry / cond Unit Test Standard
Comparative tracking index 600 / - - IEC 60112
Other properties dry / cond Unit Test Standard
Density 1320 / - kg/m³ ISO 1183
Density of melt 1120　kg/m³ -
Water Absorption, Immersion 24h 0.83 / * % ASTM D 570